Not all surfaces are suitable for playground markings—especially when using thermoplastic. This guide explains which surfaces work, which don’t, and why it matters for safety and longevity.
✅ Best Surfaces for Thermoplastic Markings
1. Fresh Tarmac (Asphalt)
The gold standard. Thermoplastic bonds perfectly to clean, dry tarmac with no cracks or debris. It ensures a long-lasting, slip-resistant finish.
2. Well-Prepared Aged Tarmac
Older tarmac can still be used if it’s structurally sound and prepped properly (cleaned, dry, no moss, no oil). We often recommend a pressure wash before install.
⚠️ Surfaces That Require Caution
3. Concrete
Thermoplastic can be applied to concrete, but it requires special primers and may not bond as effectively. It’s more prone to lifting or cracking over time.
4. Block Paving or Cobbles
Not recommended. Uneven surfaces prevent consistent bonding and create safety risks.
❌ Surfaces Not Suitable for Thermoplastic
5. Wet-Pour Rubber or EPDM
The high-heat installation process can melt or damage rubber surfaces. Thermoplastic simply won’t bond safely.
6. Artificial Grass
The plastic blades and soft base can’t withstand heat and won’t allow adhesion. Painted alternatives might work better.
7. Resin-Bound or Loose Gravel
Loose or non-porous materials prevent bonding. These surfaces are unstable for thermoplastic use.
What If My Surface Isn’t Compatible?
We can recommend alternative solutions like:
- Painted markings for flexible or rubber surfaces
- Rubber stencils or tiles for artificial grass or EPDM
- Full surface resurfacing options if needed for long-term thermoplastic install
Our Compatibility Checklist
Before installation, we inspect:
- Surface material (tarmac, concrete, etc.)
- Cleanliness (free from moss, oil, cracks)
- Drainage and slope
- Moisture levels on the day of install
If your site isn’t ready, we’ll help you get it there—or suggest the best alternative.
Not sure if your playground is compatible? Let’s take a look.
Request a Free Site Survey →